There’s no rejecting that sleek  residential polished concrete floors  have actually come to be very common in houses as well as services. If you have the skills, you do not have to hire a specialist to come as well as brighten the floor for you-you could do it by yourself.

Obtain a grinder as well as abrasive discs

You must begin by having a mill and also abrasive discs. Since the grinder is costly, you should consider leasing one from an equipment store. For suitable results you should rent out an upright, stroll behind grinder as it’s easy to make use of.

When it concerns ruby rough discs, you must purchase them. The discs can be found in different grit degrees that vary from 16 to 3,000. Keep in mind that the higher the grit number the finer the abrasive.

Remove the coating from the floor

If there is any finishing on the flooring, you ought to make use of the grit abrasive to remove it. You should begin with the rugged grit in order to level out the flooring and afterwards work your way to the finest grit disc. Along with removing the finishing the grit will certainly additionally smooth out the flooring for the brightening segment.

Fill up the cracks

If there are splits or dents on the floor, you need to load them with concrete epoxy. If you can’t get concrete epoxy you ought to get in touch with a floor covering expert that will certainly advise other reliable filler that you can use. To decrease the requirement for coarser grinding you must fill up the fractures to the flooring

Grind the floor.

Once you have filled up all the fractures and also dents you need to begin grinding the flooring. You must begin grinding from one edge and work your method throughout the whole flooring. For suitable outcomes you must utilize a 30 grit metal-bonded abrasive to begin then go on with a 80 bound grit. You ought to end up the grinding procedure with a 150 grit.

Apply the hardener

After you have entirely ground the flooring you should apply a chemical concrete hardener in order to establish a high gloss appearance. You must then polish the floor with resin-bonded ruby abrasive using 100 grit and afterwards proceed the process utilizing 400 resin-bonded grit. You need to after that use a 800 resin-bonded grit up until you have the ability to obtain the desired luster.

Final thought

This is exactly how you polish a residential polished concrete floors. For perfect results it’s excellent that you hire the services of a specialist to do the help you.

Comments are closed.

Post Navigation